My Account     Contact Us     Cart

Isolating and Displaying Specific Grid and Graticule Lines

MAPublisher Grids and Graticules is a powerful tool. There are dozens of settings to create an indexed grid, measured grid, or graticule exactly the way you want. We often receive questions about how to create certain grid and graticule styles and this was interesting. We were asked how to create a graticule to display a very specific latitude and longitude, perhaps even by itself (only a single line of latitude or longitude).

Creating a single graticule line

In this example, we’re going to create a graticule that will only display the Tropic of Capricorn at -23.4371 degrees (or 23.4371 degrees south of the equator).

On the MAPublisher toolbar, click the Grids and Graticules button to open the dialog box. Click the Graticules button to create one. On the Graticules Grid main settings, the important setting to note here is the Pass through section — it specifies lines of latitude and longitude that must be included in the graticule. Enter 30 deg Long and -23.4371 deg Lat. This means that a graticule line must pass through -23.4371 degrees latitude (the Tropic of Capricorn). The reason why a line at 30 deg longitude is specified is to hide it from the map view (it is placed at 30 deg longitude outside of the map extent).

Pass through setting

In the Intervals section, set 90 deg Latitude interval and 180 deg Longitude interval. Because the intervals are at the extreme, this means that the the only lines left to display are the ones specified in the Pass through section (30 deg long and -23.4371 deg lat). In this case, it will only display a single line of latitude (the Tropic of Capricorn) for the graticule.

Intervals setting

If you want to label the graticule, go to the Line Labels setting. Click the Lat and Lng on the grid label control to enable them. To control how many decimals are displayed, click the Format setting, then change the number of decimals to something greater than 0.

Label settings

To intersect single lines of longitude and latitude, adjust the Pass through setting so that the line is within the map’s extent. In this case, it was set to -50 deg (50 deg west).

Intersect single lines of longitude and latitude

Remember that you can share Grids and Graticules settings with anybody by clicking the Save Settings button, selecting a destination folder and sharing the configuration files.


Leave a Reply





Blog Archive

June 2019 (3)
May 2019 (4)
April 2019 (2)
March 2019 (1)
February 2019 (2)
January 2019 (3)
December 2018 (2)
November 2018 (1)
October 2018 (1)
September 2018 (2)
August 2018 (4)
July 2018 (2)
June 2018 (1)
July 2018 (1)
June 2018 (4)
May 2018 (1)
April 2018 (2)
March 2018 (5)
February 2018 (1)
January 2018 (1)
November 2017 (1)
October 2017 (2)
August 2017 (2)
July 2017 (1)
March 2017 (1)
February 2017 (2)
January 2017 (3)
November 2016 (3)
October 2016 (2)
May 2016 (1)
April 2016 (2)
December 2015 (2)
November 2015 (1)
June 2015 (1)
May 2015 (1)
April 2015 (2)
December 2014 (4)
October 2014 (2)
May 2014 (4)
February 2014 (1)
October 2013 (3)
April 2013 (1)
January 2013 (2)
October 2012 (1)
August 2012 (1)
July 2012 (3)
May 2012 (2)
January 2012 (2)
August 2011 (1)
July 2011 (2)
June 2011 (2)
May 2011 (2)
March 2011 (1)
February 2011 (1)
January 2011 (5)
December 2010 (2)
November 2010 (2)
October 2010 (1)
August 2010 (4)
July 2010 (3)
June 2010 (3)
May 2010 (2)
April 2010 (2)
March 2010 (2)

Search